Tplinkwifi.net
Tplink router login via tplinkwifi.netTplink login requires to be done so that the users are able to get into the setup web portal of the networking device. These networking devices need to be accessed and configured so that they can be used for setting up some efficient wireless as well as wired networks.
The Tp-link wireless router network can be easily set up through the web address www.tplinkwifi.net or through the default IP 192.168.1.1 or 192.168.0.1. This login address whether the IP or the custom web domain both are necessary to be used in the router configuration process.
- Connect the modem to the router’s internet port with an Ethernet cable and similarly connect your desktop or laptop computer system to a LAN port of the router with another LAN cable.
- Now, connect the power supply cords of all the devices to a power source outlet and switch on the power supply of the router.
- Wait for a while until the devices get stable. Check for the LEDs on the front panel of the router if they are solid green or amber.
- Now, open the compatible web browser and enter the web address www.tplinkwifi.net in the URL bar, also if on any off chance this link tplinkwifi.net fails to provide you the required access, then try to use the default IP 192.168.1.1 or 192.168.0.1 instead of the custom web address.
- Select the proper connection type from the drop-down list and this change is necessary only if you are not using the cable modem internet connection.
- Fill in the login details provided by your internet service providers and save changes.
- Click save and apply the changes tab and reboot now tab to restart the router. The restart should essentially happen without any interruption as that can lead to the hardware malfunction.
The Tp-link RE200 is a wifi range extender device that can enhance the existing wireless signal connectivity of your wireless router. The Tp-link RE200 extender setup doesn’t require any rocket science knowledge; anyone can set this range extender. Just follow the below-mentioned instructions properly and carefully in order to get the device configured and added to your current wireless router.
- Unbox your Tp-link RE200 extender and plug it into a power outlet near your wireless router and switch on the power supply.
- Wait for a while and then open the wifi settings panel on your computer system and look for the TP-link RE extender wireless network and connect your system to it.
- Now open the web browser and enter the web address www.tplinkrepeater.net in the URL bar of the browser and hit enter.
- Enter the username as “admin” and password as “admin” and click enter again. The range extender’s web user interface will be opened.
- Click the Next button and the system will search for the available wireless networks. Select your wireless network to be extended by selecting the checkbox against your wireless network.
- Your existing wireless network will be enhanced and the wireless signal connectivity of the wireless router will be boosted instantly.
TP-link default password
How to change the default password of the Tplink wireless router?
Changing the TP-link default password is strongly recommended as this keeps the router device safe and secure. The unauthorized access to your TP-link wireless router can also be checked if the default password has been customized accordingly.
Here is how you can change your Tplink default password. Follow the steps mentioned below.
- Assuming that your router and other devices are interconnected and stable, open the web browser and enter the address tplinkwifi.net.
- Enter the default login credentials as “admin” in both the username and password fields.
- Now, select the Administration or Maintenance section and then select the wireless security tab.
- Enter the default password once and then enter the new customized password twice to confirm it.
- Click save and apply changes tab. Click reboot now tab to make all the changes effective on the hardware.
- Your Tp-link wireless router will now be secured with the customized login values that you have set.
- Makes sure to set up a more complex passphrase combination including the upper and lower case letters, special symbols and numerals. Also, keep the password length of minimum 8 characters.
- Also, it is advised to keep a note of your login password somewhere safe if you cannot remember it easily.
Yes, the users can also log into their Tplink wireless routers for set up and configuration also through the device’s default static IP which is 192.168.1.1 or 192.168.0.1
The Tplink networking hardware can also be accessed through the Tplink Tether application which is available on all the application stores. This smart router application allows the much easier access of the device remotely and on the smartphone device also.
Tplink AC1750 firmware update
How to update the firmware of the TPlink AC1750 router?
- First of all, the firmware update file needs to be downloaded from Tp-link web portal i.e. www.tplink.com/support.
- Save the firmware update file in an easily accessible location of your PC.
- Open the browser and enter the address tplinkwifi.net or the IP 192.168.1.1 or 192.168.0.1 in the address bar of the browser.
- Enter the router login details like the username and password which are “admin” for both the cases.
- Select the Advanced tab>Administration table and then click the router update>update tab.
- Browse the firmware update file from your computer and system. Open and select it to start the update process.
- At the end of the process, the router will get a reboot and your TP-link device will get equipped with a new firmware version. Always try not to interrupt the reboot process at the end.
Some of the features of the TP-link C7 Archer AC1750 router have been listed below.
- Multiple Gigabit Ethernet ports
- TPlink Tether app compatibility
- Dual band frequency channel supported
- USB access available on the router device
- Easy one-touch WPA wireless security encryption with WPS button
No comments:
Post a Comment